Location:Home > Products > Ice Cream Equipment... > A600L Ice Cream Free...

Ice Cream Equipment

A600L Ice Cream Freezer

Runchen©FruntTM-A600 is continuous freezer. The machine has a cold source of its own, and users can only need to connect the cooling water, electricity, compressed air and ice cream ingredients(slurry) to produce the ice cream. Ice cream ingredients and the air enter the freezing cylinder through the European imported gears mixing pump with an air inlet valve, and the freezing cylinder is refrigerated by the Freon compressor brought by itself, and the stirring scraper located in the freezing cylinder mixes the air into the slurry, and then the special stainless steel scraper mounted on the stirring scraping device continuously scrapes the ice cream on the freezing cylinder wall, and the ice cream discharges out of the discharging pipe.

Action

Mix, freeze and stir the slurry and air into ice cream. It can automatically produce ice cream with a uniform quality. Compared with intermittent production, its effective, reasonable and continuous production can reduce the cost and ensure the stability of the fluid.

Standard design

FruntTM-A600 is a ice cream freezer  and fully meets the needs of food hygiene. The equipment is made up of the high quality refrigeration compressor and high quality parts, which is designed to meet the strict standards of hygiene, reliability and durability. All parts contacting the ice cream are made of 304 stainless steel.


Freezer Body

The freezer body is made of stainless steel. Two stainless steel sides of the freezer can be removed to facilitate repair personnel to repair other parts of the equipment.


Freezing cylinder

The surface with precision grinding of the freezing cylinder is hard chromium plating to achieve a smooth surface, therefore, the ice cream mixture materials can obtain excellent heat exchange and an effective freezing effect. It is equipped with a stainless steel stirring scraper with a blade which continuously rotates at a certain speed along the inner surface of the freezing cylinder to ensure a smooth and fine ice cream products. The power is conveyed to the stir wiper components by the main motor through the belt.


Refrigeration System

The refrigeration system is built-in Dorin semi-hermetic type compressor and uses Freon as the refrigerant.


Pump Body

Using gear pumps imported from Europe as the ice cream ingredients mixing pumps. The power of mixing pumps uses the frequency control.


Operation of The Freezer

Operation panel

All function buttons are located on the front panel, simple and easy to use.

The following operational switches are included:


  • Startup/Turn off the mixing pump
  • Startup/Turn off the stirring scraper
  • Startup/Turn off the refrigeration system
  • Startup/Turn off the heating system
  • Ice cream output control
  • Ice cream viscosity display


Startup of The Freezer

It's convenient that the machine can be directly operated after the water, power and gas are switched on.


Cleaning

The cleaning of the freezer can be made through connecting the central CIP system. The whole operation procedure can ensure the separation of the vane and pump body of the star moon pump, and the detergent of large flow rate can smoothly through from on side. The connection of pipelines adopts clamp construction.


Operational Components

  • Mixing conveying pump
  • Other spare parts

600L Manual Freezer Technical Parameter

Technical items Parameters Remarks
Built-in compressor 9.7 KW
Refrigerant gas Standard R507
Content of the refrigerant 3.2 Kg(7.06 LB)
Condensing medium Water
Mixing motor 5.5 KW
Hybrid motor 0.75 KW
Total power 16.6 KW
Air consumption 1 m3/h
Compressed air consumption 6 bar
Compressed air mass, maximum moisture content 2.5 g/m3
Condensed water consumption:water in water pipe ≤+20℃
3000 L/h
Condensed water inlet connection 1"
Condensed water outlet connection 1"
Mixture feed tube, outside 25 mm 1" clamp
Ice cream discharging tube, outside 38 mm 1 1/2"clamp
Maximum overrun ratio 100%


600L Manual Freezer Description

No. Items Choosing Brands & Materials Unit Qty
1 Compressor

Hermetic Compressor, Copeland(Germany), 9.7 KW, 12.5 P

Condensing Medium: R507

pcs 1
2 Water-cooled Heat Exchanger Alfa Laval(Sweden), 1.4 m2 pcs 1
3 Fluorine Intercooler Alfa Laval(Sweden) pcs 1
4 Main Motor ABB(America) pcs 1
5 Pump Motor Bonfiglioli(Italy) pcs 1

Normal production

160~600 L/hour
42~158 gallons /hour

The production volume is based on the following conditions

Slurry input temperature
+5℃(+41°F)
Slurry output temperature
-5℃(+23°F)
Overrun ratio
100%


Standard ice cream formula

Grease(HCO)

Non-fat milk powder Sugar(sucrose) Glucose syrup Emulsion stabilizer Condensate content Water Total
10.0% 10.5% 12.0% 5.0% 0.5% 38.0% 62.0% 100%

Customer Inquiry

(*is required)
*Name:
*Tel:
*Email:
*Content:
*Verification code:
Address: (factory building of Taizhou Xinhua Color Printing Co., Ltd.)North Side of Jianshe Road, Sixiang Street, Taizhou City, Jiangsu Province,China
上海润辰实业有限公司版权所有 沪ICP备 10005672号 ©2010-2014 runchen ALL RIGHTS RESERVED

Login No Account? Sign up now

Email Login

Email: Password:

Forget ?    Remember

账号密码索要详情联系13816134166 邵先生

Have an account?Login

Find Password